HomeNewsShip launchingFerryboat Launching in Tunis with evergreen airbags

Ferryboat Launching in Tunis with evergreen airbags

950 Ton newly constructed Ferry by Societe De Constructions Industrielles Et Navales was to be launched in Sfax, Tunisia.

After an initial study of various methods of ship launching, Evergreen Marine Airbags proved to be the pioneering and promising technology for this launch.
Ferryboat Launching in Tunis
ISEAS being a representative of Evergreen-Maritime in Middle East, Africa and India Region, was pleased to get this opportunity to do a technical feasibility study for the launching of this newly constructed Ferry.

At an initial stage, ISEAS’ representative carried out technical feasibility study by personally visiting the site. Various aspects of launching the ferry with Evergreen Marine Airbags were considered and discussed in detail.

Considering the shape of the bottom of the ferry, V shaped hull, it was critical to choose the right size of airbags as well as to design the slip way appropriately. The size of Evergreen Marine Airbags to be used was advised after a careful and systematic study. Accordingly the slip way angle was suggested.
Ferryboat Launching in Tunis
It was also noted that this Ferry was constructed on a flat ground in Tunisia. Fortunately the flexibility of airbags proved remedy to this practical limitation; the slope could be created by adjusting the inner air pressure of the Evergreen Marine Airbags.

With all the necessary recommendation a complete report was submitted by ISEAS in order to ensure the safe and certain launch with this technology.

Prelaunch Preparatory and Evergreen Marine Bags Inspection was carried out at an intermediate stage. ISEAS’ engineer effectively pressure tested all the Evergreen Airbags and inspected all other pre launching preparation.

Finally on 26th of May 2010, Vessel was ready to be launched with Evergreen Airbags Technology and as anticipated after all the necessary preparation under the supervision of ISEAS personnel, Mr. Krishan Kumar, the vessel glided into the water effortlessly as expected. The launch was Successful.

ISEAS is pleased to represent Evergreen Marine Airbags in Middle East, Africa and India region and it strives to continue launching more vessels using this Innovative & Safe Technology.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement - Newspaper WordPress Theme

Latest news

Big Ship Ballon airbags Launches Of KBSBL M.T KHUSHNAHAR-5 In Bangladesh

Big Ship Ballon airbags Launches Of KBSBL M.T KHUSHNAHAR-5 In Bangladesh   https://youtu.be/MMGuXknzKc0

Ceremonial ship launching with airbags from Bangladeshi

https://youtu.be/unvDEa0VYu0   Airbags Launching of D.T.C - 04 | Ship Launching  airbags| ARSEL https://youtu.be/0ZLGBvZZx9c   Ship Launching of DTC-07 ,  with marine airbags,ARSEL. https://youtu.be/bL6t8bHfSXQ A boat, a small pool:Bangladeshi customer for...

Maintenance and repair for ship launching airbags

In use, ship launching airbags should avoid contact sharp objects, such as welding leftover, steel nails, sharp stones that can puncture or wound air bags. Most damage of airbags are caused by neglected sharp objects.

FROM SHOP